Switched PDU – 3.3kW, C1W08HC-0ABA2BAC

Key Features

NETWORK MONITORING
Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.

HOT-SWAP NETWORK CARD
Network access is ensured when power is lost to the Primary unit with backup power provided by the primary link unit.

STAR MULTI-LINKING
Provides the ability to link up to four power circuits using one IP address. Primary link provides backup power to network card.

TEMPERATURE/HUMIDITY MONITORING
Primary and Link units each support two external 10′ (3m) T/H probes. Receive SNMP-based alerts and email notifications.

AUTO-FLIP CURRENT DISPLAY
Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high-density cabinets.

PER-INLET POWER SENSING
Meets ANSI C12.1 for billing-grade accuracy of Current per phase. PIPS includes voltage, active power, apparent power, power factor, and energy.

BRANCH CIRCUIT PROTECTION
This PDU meets the UL and IEC 60950-1 requirement for branch circuit protection through use of UL489 rated magnetic-hydraulic circuit breakers or UL248 fuses.

OUTLET CONTROL
On Switched rack PDUs, cycle power to individual outlets or groups of outlets to reboot servers. Or, power off unused receptacles.

HIGH RETENTION LOCKING OUTLETS
Receptacles have high retention and are compatible with P-Lock type power cords.

HIGH TEMPERATURE RATING
This product has been tested and approved for safe and reliable operation in 60 °C data center environments.
The Server Technology® PRO1 Switched PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO1 Switched “Primary” PDU can be connected to as many as three (with optional module) PRO1 Switched “Link” PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Inputs

Outputs

Branch Circuit Protection

UL489 Compliant 2-pole, 20A trip circuit breakers, two (2) branch, rating: ≤ 16A, 5 kAIC Interrupt Rating

Physical

Dimensions: 1.75in tall x 17.2in wide x 7.0in deep [45mm x 437mm x 178mm]

Environmental

Operating Environment: 32°F to 140°F / 0°C to 60°C | 8%RH to 90%RH non-condensing | 6,500ft/2km elevation
Storage Environment: -40°F to 185°F / -40°C to 85°C | 8%RH to 90%RH non-condensing | 50,000ft/15km elevation
Quiescent / Unloaded Power Draw: < 10W for all configurations

Communications & Security

10/100/1000 Mbps Ethernet (RJ-45 connector), RS-232 serial (RJ-45 connector)
Two (2) temperature/humidity sensor inputs (4P4C), Link port (RJ-12) – {also on Link PDU}
Web-browser GUI and command-line interface (CLI): HTTP/HTTPS, TLSv1.2, SSHv2, Telnet, SNMPv2c and v3 (GET, SET, Traps), IPv4 and IPv6, LDAPv3/LDAPS, TACACS+, RADIUS, FTP/SFTP

Certifications

North American:
Safety (TUVR certified, cTUVus mark)

• UL Std. 60950-1, 62368-1
• CAN/CSA-C22.2 No. 60950-1, CAN/CSA-C22.2 No. 62368-1

EMC

• FCC Part 15 Subpart B Sections 15.107 & 15.109, Class A
• CAN ICES-003, Class A

Global:
Safety

• EN 62368-1 (TUVR certified, T-mark)
• IEC 60950-1 incl. regional, national and harmonized differences (IECEE CB scheme)
• IEC 62368-1 incl. regional, national and harmonized differences (IECEE CB scheme)

EMC

• EN 55032 / IEC 55032 / CISPR 32
• EN 55024 / CISPR 24
• EN 55035 / IEC 55035 / CISPR 35
• EN 61000-3-2 / IEC 61000-3-2
• EN 61000-3-3 / IEC 61000-3-3

• RoHS, European Hazardous Materials Directive, 2011/65/EU
• WEEE Compliant
• CE Mark
• UK Legislation
• RoHS, Electrical Equipment (Safety) and Electromagnetic Compatibility

Measurement Accuracy

Input Measurement Accuracy:
LED Current = ± 10% at 0.1 amp (0.3 – 9.9 amps) and 1 amp (> 9.9 amps) resolution
GUI Current = ± 1% at 0.01 amp resolution (above 0.25 amp)
Voltage = ± 1% at 0.1 volt resolution (nominal ± 10%)
Active Power = ± 1% at 1 watt resolution
Apparent Power = ± 1% at 1 volt-amp resolution
Power Factor = ± 3% at 0.01 resolution
Crest Factor = ± 10% at 0.1 resolution
Energy = ± 1% at 0.1 kilowatt-hour resolution